Yankee
2101 Bell System 10" Brace Smooth running.
Clean. No issues.
Little used. The brace of choice by users!
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
OAK-YANK-2101
Good + . . . . . $125.00
To Order Email: patentedantiques@gmail.com
Ruger
Egg Beater Drill Bill Ruger only made this
design drill for a short period, but each of these has subtle differences.
The pics show the differences. The bottom one is missing its end cap.The middle one is blued and appears to have never been painted with the typical red paint Bill Ruger used. Restored? I am no expert and do not know all the fine points, but this one sure looks right, and great.
The paint on the top one is so bright I am going to go out on a limb here and say it was redone.
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
TX-RUG-EG-1T TX-RUG-EG-2M TX-RUG-EG-3B
Good + Top . . . . . $395.00 SOLD!!
Fine Middle. . . . . $495.00
Good Bottom . . . . . $250.00 SOLD!!
To Order Email: patentedantiques@gmail.com
2 Corner Braces
A minty nice
Millers Falls 502, and one dirty but nice one I do not see any name on right
off. It does have a distinctive dust cover over the U joint. It
would clean up to be much nicer.
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
GIL-CORNER-MF GIL-CORNER-D2
MF 502 - Fine . . . . . $75.00
Dirty - Good . . . . . $25.00
To Order Email: patentedantiques@gmail.com
Patented May 25
1886 Davis Level & Tool Co. Bit Brace
I see one patent date on the small ratchet knob. That patent was
granted to a John Bolen. It is
marked L. L. Davis on the brass chuck. The condition is very nice with minor nickel losses and some rusty
spots. The ratchet works and the chuck is pretty nice. This
would clean up to be much nicer.
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
Click For Pic
TX-DAVIS-BRACE
Good +. . . . .60.00
To Order Email: patentedantiques@gmail.com
Davis
Level & Tool Co. Patent Brace A non ratcheting
example. Gutta Percha handle is damage free. The patent info is around the chuck.Click for Pic Click for Pic Click for Pic Click for Pic Click for Pic
TX-DBRACE
Good . . . . . $30.00
To Order Email: patentedantiques@gmail.com
Millers
Falls No. 1 Drill Cute little cast
iron drill for
fine work. No issues. It will make for a good user!
OAK-MF-1-D
Good + . . . . . $65.00
To Order Email: patentedantiques@gmail.com
Millers
Falls No. 2 Hand Drill Box is
tattered & taped, the drill itself in near mint. The faded decal on
the handle is near complete. Minor losses to the paint. Little
used. No issues. The hand down / hands on favorite of users!click for Pic click for Pic click for Pic click for Pic click for Pic
G-MF2
Fine . . . . . $175.00
To Order Email: patentedantiques@gmail.com
Yankee
1530 A Hand Drill w/ 4 Speed Transmission
I am guessing WWII era given the
lack of nickel. Runs OK. A favorite w/ users. Clean &
nice enough!!Click for Pic Click for Pic Click for Pic Click for Pic
OAK-YANK-1530A
Good . . . . . $35.00
To Order Email: patentedantiques@gmail.com
Stanley
12W Whimble Brace Dirty and nice. Good
wood. Nickel losses. Some rust. Will
clean to be nicer.Click for Pic Click for Pic Click for Pic
OAK-S12W-BRACE
Good . . . . . $55.00
To Order Email: patentedantiques@gmail.com
Goodell Pratt No. 0 Reciprocating Drill
Very nice.
Like new hardly used. Shelf dust from sitting 75 years. Good
wood. Catalog calls it off as cherry. Chuck revolves on both the
up and down stroke. 16-1/2" long with a 1/4" three jaw chuck. The chuck is marked
"Goodell-Pratt Company Greenfield, Mass. U.S.A. Pat. Aug. 3, 1895. Click for Pic Click for Pic Click for Pic Click for Pic
OAK-GP-0-DRILL
Fine . . . . . $55.00
To Order Email: patentedantiques@gmail.com
James
Swan 6516 Auger Bit Handle
NOS.
Like new never used. Box tattered. Shelf dust from sitting 75 years.
Has second smaller adapter.
OAK-SWAN-HNDL
Fine . . . . . $75.00
To Order Email: patentedantiques@gmail.com
Greenlee
448 - 447 Spiral Screw Drivers
NOS. Very nice.
Like new never used. Called off as 448 / medium and 447 / small.
OAK-GREENLEE-SD-S OAK-GREENLEE-SD-M
Fine . . . . . $60.00 / pr.
To Order Email: patentedantiques@gmail.com
Yankee
/ North Brothers Spiral Screw Drivers
NOS. Very nice. 31 w/o spring, and
two NOS 135A w/ springs. One 135 loose. Click for Pic Click for Pic Click for Pic
OAK-YANK-31 OAK-YANK-135GB OAK-YANK-135YB OAK-YANK-135NB
31 - Fine . . . . . $45.00
135 - YB - Fine . . . . . $35.00
135 - GB - Fine . . . . . $35.00
135 - NoBox - Good + . . . . . $10.00
To Order Email: patentedantiques@gmail.com
Yankee
/ North Brothers 130A Spiral Screw Driver
Works fine. 3 bits. Box has been taped,
and then taped again. A good user. Nice!!
CYN-130A
Good + . . . . . $15.00
To Order Email: patentedantiques@gmail.com
6
Extra Long Auger Bits They
are by Irwin & Russell Jennings. Most look to have never been used.
One of the larger is a flat bottom. As a lot or individually.
OAK-L-AUGER
Fine . . . . . $40.00 / Lot or Individually on a sliding scale 15 - 25.00 each. The biggest ones are more.
To Order Email: patentedantiques@gmail.com
Irwin
"DR" Auger Bits in Plastic Roll They
are a matched set by Irwin. Most look to have never been used.click for Pic click for Pic click for Pic
G-I-AUGER
Fine . . . . . $70.00
To Order Email: patentedantiques@gmail.com
Morse
Twist Drill & Machine Co. Drill Index w/ Bits 27
fractional inch places in folding holder. All holes filled. What
you see is what you get. No guarantees all are correct size, but majority are. Some are NOS, most look to be very nice. Click For Pic Click For Pic Click For Pic Click For Pic Click For Pic
D-INDEX-MTDMC-2
Fine . . . . . $65.00
To Order Email: patentedantiques@gmail.com
The Cleveland
Twist Drill Co. Drill Index w/ Bits 60
letter / decimal sized places in nice metal holder. All holes filled. What
you see is what you get. No guarantees all are correct size. Some are NOS, most look to be very nice. Click For Pic Click For Pic Click For Pic
D-INDEX-CLEV
Fine . . . . . $50.00 SOLD!!
To Order Email: patentedantiques@gmail.com
AJAX
Folding
Drill Index w/ Bits 60
letter / decimal sized places in nice metal holder. All holes filled. What
you see is what you get. No guarantees all are correct size. Some are NOS, most look to be very nice. Click For Pic Click For Pic Click For Pic
D-INDEX-AJAX
Fine . . . . . $65.00 SOLD!!
To Order Email: patentedantiques@gmail.com
Stanley
/ Yankee Auger Bit Extensions 3 NOS boxes.
No box for the 24. One box a bit tattered. By Stanley & Yankee
/ North Brothers. 12" - 18" - 21" & 24". USA made. Minty nice and appear to have never been used.
OAK-S90-BX
Fine . . . . . $20.00 / Each 12" SOLD!!
To Order Email: patentedantiques@gmail.com
Millers
Falls 18" Auger Bit Extension Box is a
bit tattered, the extension is minty nice like new.click for Pic click for Pic click for Pic
G-I-AUGER
Fine . . . . . $20.00
To Order Email: patentedantiques@gmail.com
Stanley
No. 49 Auger Bit Depth Stop / Gauge The
japanned one is WWII vintage. Both are in good condition.
OAK-S49-B OAK-S49-N
Good + . . . . . $15.00 Choice
To Order Email: patentedantiques@gmail.com
The Twist Drill & Machine Co Morse Patent
Drill Index New Bedford MA The name and patent
info were removed from the center so Samuel Mongeau Jr. could stamp his name instead.
AMN-D-INDEX
Good . . . . . $10.00
To Order Email: patentedantiques@gmail.com
We buy quality Antiques in this and other categories of Antiques.
To view examples of the types of antiques and collectibles we have previously sold
and are always interested in buying please visit our
Past Sales Archive Pages at our sister website
www.AntiqBuyer.com.