Stanley
Plane Knobs High & Low
Stanley changed the form of their front knobs
over time
from beaded base low, to just low, to high, to high with a bevel at the base, and
then from Rosewood into the era of hardwood. These are all vintage Rosewood and very nice.
LCM-KNB5
Good+....$15.00 / ea.
Stanley
#1 Sweetheart Era and Other Era NOS Cutters
The cutters are nice and original. The chip breakers and the screws are modern
knockoffs that look OK and will function but are not original. Very Nice!
CYN-MP-1C
Excellent.....$40.00 / ea.
Stanley
#1 Sweetheart Era and Other Era NOS Cutters
The cutters are nice and original. The chip breakers on these 5 are original.
The collector ran into a supply of these cutters at his local favorite hardware
store. There are several different logos available, so ask for what you want.
I remember the good old days when fellows would show up at meetings in the 80'sand even 90's with loads of NOS Stanley stuff they were still pulling out of old time shops and stores. The good old days. Very Nice!
Click for Pic Click for Pic Click for Pic Click for Pic
CYN-MP-1
Excellent .....$70.00 / ea. Or 40.00 / cutter alone
Stanley
# 444 Spur Blocks
The #444 Dovetail
plane is notorious for missing parts especially the spur blocks. These do
not say it, but i believe they are recasts because of the roughness of the castings,
but there is no information on them to say one way or the other.
CYN-MP-1
Excellent..... $30.00 / ea.
Stanley
# 46 Parts
Here is the main body, and outside fence for a 46. Both are
nice and will clean to be nicer. Minor rust, but good nickel and no
pitting or damage
TL-46BDY TL-46F
Body . . . Good . . . . . $35.00
Fence . . . Good . . . . . $25.00